• Single component.
  
•  Easily applied.
  
•  Ready to use.
  
•  Creates good adhesion and bond between the membrane and substrate.
  
•  Good penetration behavior with surface pores of concrete to ensure optimum adhesion.
  
•  High coverage rate.
  
•  Good dust absorption property, hence preparing the surface for effective bond between the substrate and membranes.

•  As a damp – proof membrane For :-
  – Concrete and masonry.
  – Foundation footings.
  – Ground beams.
  – Retaining walls and basements.
  
• Priming coat for general uses.
  
• Protective coating for concrete.AS A COATING :
• ALNAKHIL BITUMEN First Degree can be used as a protective.
• Coating for foundations, for building facades (under curtain walls) and other structural components.
  

S.G at 25°C                            0.87+ 0.03
Saybold furol                       25 – 125
viscosity at 25°C                  sec
Bone dry at 25°C                 24 hrs
Solid content                        40% +- 5%
Water content                     Zero
Shelf life                                12 months

• Surface must be clean and dry.
  
•  Surface must be free from oil and greases.
  
• ALNAKHIL BITUMEN First Degree can be applied by brush, roller and airless spray.
  
• Apply a full coat ALNAKHIL BITUMEN (S) direct from drum and allow drying 24 hours.

ALNAKHIL BITUMEN First Degree contains petroleum solvents and is flammable, so good care must be taken during application.
Like all chemical products, avoid contact of ALNAKHIL BITUMEN (S) with eyes, mouth and skin.
If accidental skin contact occurs, remove immediately with clear water and seek medical treatment.
The following precautions are recommended:

• Avoid direct contact with skin and eyes.
• Keep away from fire or any ignition source. No smoking is allowed during application.
• Use gloves during application. Clear all tools by white spirit.
• Close package well after use.

Available in:

• Drum : 175 kg.
  
• Metal Pail : 16 kg.